Build Your Own Rain Barrel To Save Money, Environment

According to the EPA, during summer months, lawn and garden watering account for roughly 40% of a typical home’s water use.

It’s a statistic that reminds us how “green lawns” can be wasteful to both the environment and household budgets  – especially with drought conditions expected and water costs rising in many U.S. municipalities.

As a homeowner in Woodstock , to help Mother Nature and your wallet, consider added a rain barrel to your home.

A rain barrel is a rain-capturing system that collects and stores water runoff from your roof. Often attached to a home’s gutter system, a standard rain barrel collects and holds 55 gallons of water which can then be reused to water plants, wash cars, and clean driveways among other uses. Because the water is natural (i.e. not treated with chlorine or lime), it’s also ideal for window washing.

Rain barrels can be purchases at most hardware or garden stores, or online via Amazon.com, for example. Or, they can be hand-built.

To install your rain barrel, first find a location for it, either under a downspout or near one. Make sure to select a stable location because water weighs roughly 8 pounds per gallon. A full rain barrel will weigh over 400 pounds, therefore, so be sure the ground beneath the it is solid and flat.

Next, if your rain barrel is hand-built, use PVC piping to reroute falling water into the mouth of the barrel itself, making sure to create a water-tight seal between the piping and the downspout. Or, if you’re using a store-bought rain barrel, follow the manufacturers instructions to “connect” the rain barrel to the downspout.

And, as the last step, be sure that the mouth of the rain barrel is protected from outside debris such as leaves, flowers and bugs. A formal lid or a covering made of wire mesh makes for a suitable protective cover. Most store-bought rain barrels will be sold with a covering.

That’s it. Just remember that basic maintenance will be needed. Water caught by a rain barrel should be used regularly to prevent “standing water” and protective screens should be cleaned regularly.

For a step-by-step guide to building your own rain barrel at home, click here.

Do us a favor if you or someone you know is about to buy that perfect home, please recommend us to them. When you find your dream home, make sure that you get a thorough home inspection in Atlanta, GA from the home inspector Atlanta, GA, David Lelak of IHI Home Inspections, they serve Atlanta and all of North Georgia. Call us today at 404-788-2581 for a thorough home inspection in Atlanta. We won’t let you buy the money pit.  You can also schedule your Atlanta home inspection today online.  We create Peace of Mind One Atlanta home inspection at a time.  Be sure to check out all the other reasons other customers chose IHI Home Inspections at our original website. 

How To Replace Cracked, Dirty Grout

The home inspector in Atlanta GA often finds cracked grout and tile during his home inspections in Atlanta.

Tile is among the most versatile home surfacing materials. It can be as functional and good-looking on your home’s walls as it can be on counter tops, adding a polished look to your kitchen or bathrooms.

Tile is also easy-to-clean — so long as it’s well-maintained.

Proper tile cleaning is more than just a daily wipe-down. Cleaning tile requires a periodic resealing of the tiles themselves, as well as a re-grout for when the existing grout cracks, or stains.

Replacing grout is a job that’s low on skill but large on elbow grease. You can hire it out to a handyperson in Canton , or you can handle it in-home. If you choose to replace your own grout, here are the steps you’ll want to follow.

First, you’ll need some tools :

  • Hammer and screwdriver
  • Grout scraper
  • Putty knife
  • Damp sponge
  • Dry cloths
  • Grout
  • Grout sealer

Start by using your screwdriver to loosen bits of the damaged and/or dirty grout. Tap the screwdriver with the hammer gently to avoid scratching your tile. Once you’ve loosened the grout, use the grout scraper to remove the remnants.

Next, pour new grout into the crevices between the tiles and smooth it into place using the putty knife. The motion is similar to that of buttering a slice of bread. Scrape up the excess grout as you work. Continue spreading the grout until you’ve finished a several-foot section.

Before the grout has dried, use a damp sponge to wipe the tiles clean and neaten the grout lines. You can also use your finger to smooth and remove excess grout from between the tiles.

Repeat the grouting and cleaning process until all of the grout has been replaced. Allow the grout to dry for the length of time recommended by the manufacturer.

Next, using the dry cloths, buff the tiles, using a forceful, circular motion to remove any remaining grout residue.

Then, as a final step, for long-lasting protection, seal the grout using a commercial grout sealer from a hardware store.

Keeping grout in good condition does more than just make your kitchen or bathrooms look great — it protects the surfaces beneath the tile, too. Re-grouting tile is a basic home improvement task that can pay for itself many times over.

Do us a favor if you or someone you know is about to buy that perfect home, please recommend us to them. When you find your dream home, make sure that you get a thorough home inspection in Atlanta, GA from the home inspector Atlanta, GA, David Lelak of IHI Home Inspections, they serve Atlanta and all of North Georgia. Call us today at 404-788-2581 for a thorough home inspection in Atlanta. We won’t let you buy the money pit.  You can also schedule your Atlanta home inspection today online.  We create Peace of Mind One Atlanta home inspection at a time.  Be sure to check out all the other reasons other customers chose IHI Home Inspections at our original website.